FatTireConversions.com sells lots of Honda Fat Cat 200 parts. From air filters to tires, we have what you need to keep your Fat Cat on the trail. This page shows the common parts that riders need, but we have much more available. We sell OEM Honda parts, as well as replacement parts made just for FatTireConversions.com. If we don't list what you need here, please check out our parts diagrams page. If you don't find what you need there, please contact us.

REPRODUCTION PLASTIC BODYWORK

FatTireConversions.com now stocks DC Plastics replica plastic body parts for all years of the Honda Fat Cat. These HDPE thermoformed plastics are molded off of original Honda plastics and are high-quality reproductions. These plastics have been made by DC Plastics for years and work very well. Please select the parts you need below as we offer them individually or as a set.


SEAT COVERS - $49.99

FTC stocks blue seat covers for all years of the Honda Fat Cat. These covers fit just like the stock ones and are made just for us by a well known seat cover manufacturer. These covers have the Honda insignia on both sides as shown in the picture.


AIR FILTERS - $19.99

FatTireConversions.com stocks genuine Honda air filters for both years of the Honda Fat cat. The Honda part number for this filter is 17213-HB7-670, which replaces part number 17213-HB7-003, and it does not include the internal metal air filter support cage.


OIL STRAINER & CLUTCH COVER GASKETS $7.99/$12.99

FTC stocks genuine Honda oil strainers, as well as quality aftermarket clutch cover gaskets (made in Canada just for FTC), which have to be changed when you clean or change the oil screen on the FatCat, as it is mounted internally and you have to remove the clutch cover to access it. The Honda part number for the strainer (filter) is 15421-KK0-000, and the gasket we stock is a direct replacement for Honda part number 11393-HB5-306. We sell these parts separately, so if you need both, please be sure to add both to your shopping cart before finalizing your purchase.


GASKET & SEAL KITS

FTC offers Athena brand gasket and seal kits for all Honda Fat Cats. We offer a top end kit and a full seal and gasket set (kits do not include valve stem seals). The top end gasket sets includes required gaskets and seals, but does not include valve stem seals. The full gasket and seal kit includes all the required gaskets and O-rings for a full rebuild, but does not include the valve stem seals. Be sure to select the correct kit below. These kits typically ship in about 4 business days.


EXTERNAL ENGINE SHAFT SEALS

FTC stocks all the external engine shaft seals for both years of the Honda FaT Cat (shaft seals listed here fit both years of this machine). We sell these seals individually or as a set of all three (shifter shaft seal, kickstarter shaft seal, output sprocket shaft seal). Please select the parts you need below.


ENGINE VALVES & SEALS

Info will be posted soon.


FORK BOOTS - $29.99

FTC stocks quality aftermarket fork boots for all years of the Honda Fat Cat. We offer them in both blue and black, they include zip ties to fasten them, and they come in pairs.


FORK SEALS - $27.99/SET

FatTireConversions.com stocks All Balls Racing fork oil and dust seal kits for both years of the Fat Cat. These high-quality kits come with two oil seals and two dust seals, so you can replace both at the same time.


STEERING STEM BEARINGS & SEALS - $41.99

FTC stocks All Balls Racing steering stem bearing and seal kits for both years of the Honda Fat Cat. This kit comes with two replacement cone style roller bearing assemblies to replace the annoying loose ball bearings that the Fat Cat came with, as well as two new grease seals so you have everything you need to replace the worn-out steering head bearings on your bike.


FUEL PETCOCKS - $55.99

FTC stocks genuine Honda fuel petcocks for all Honda Fat Cats. The original fuel valve assembly, Honda part number 16950-HB7-005, is no longer available, so we hunted down this alternate Honda part that we've been able to verify fits properly and does the job!


THROTTLE CABLES - $19.99

FatTireConversions.com stocks quality Motion Pro replacement throttle cables for both years of the the Honda Fat Cat. This cable comes with the carburetor slide cap and installs just like the original. This is a replacment for the original Honda part number 17920-HB7-305.


FRONT BRAKE CABLES - $49.99

We now stock quality Motion Pro front brake cables for all years of the Honda Fat Cat. This cable fits in place of the now discontinued original Honda part number of 45450-HB7-000, and goes from the front right handlebar to the brake drum on the front wheel.


REAR BRAKE CABLES - $59.99

We now stock quality Motion Pro rear brake cables for all years of the Honda Fat Cat. This cable fits in place of the now discontinued original Honda part number of 43460-HB7-405, and goes from the front left handlebar all the way to the rear brake drum.


CARBURETORS

Info will be posted soon.


CARBURETOR REBUILD KITS

Info will be posted soon.


CARBURETOR NEEDLE VALVES

Info will be posted soon.


BRAKE SHOES - $18.99/SET

FTC stocks EBC Carbon-X brake shoes for both years of the Honda Fat Cat. These shoes are sold in front and rear sets and include the retention springs.


HEADLIGHT BULBS - $8.99

FTC stocks genuine Honda headlight bulbs for both years of the Fat Cat. The Honda part number for bulb is 34901-HC3-003.


IGNITION COILS

Info will be posted soon.


IGNITION SWITCH

The original ignition swith for Fat Cats, Honda part number 35100-HB7-671, has been discontinued, but we're hunting for a replacement solution. As soon as we have a solution availble, we will offer it here.


HEADLIGHT SWITCH

Info will be posted soon.


TAILLIGHT LENSE - $14.99

FTC stocks replacement Honda taillight lenses for Honda Fat Cats. The Honda part number for this lense is 33702-KN5-671 and fits both years of the Fat Cat.



TAILLIGHT BULB SOCKET - $24.99

FTC stocks replacement taillight sockets for Honda Fat Cats. The original Honda part number for the socket that came on the Fat Cat, part number 33705-HB7-000, has been discontinued, so we hunted down this alternate genuine Honda part that has a bit of a longer wiring pig tail (will have to be spliced in). This socket comes with the bulb and will need to be spliced into your existing wiring harness.


CLUTCH DISKS & SPRINGS

FTC offers EBC CK series primary clutch kits for both years of the Fat Cat. We also offer the clutch springs as a separate kit. The full clutch kit comes with a full set of cork-based friction disks, steel drive disks, and clutch springs (10% stiffer than stock). Please select the kit you need below. These parts typically ship in about 3 business days.


CLUTCH SHOE & CARRIER ASSEMBLY - $154.99

FTC offers genuine Honda clutch shoe and carrier assemblies for both years of the Fat Cat. The Honda part number for this clutch is 22400-HM8-000 and Honda states that it is only a stock replacement part for 1987 models. However, we have been able to verify that it fits on 1986 models in place of the original Honda part number 22400-HB3-325, as all the parts that this assembly contact (crankshaft, clutch drum, one-way clutch, retaining nut, washer, and cap) are the same between the two years. This part typically ships in about 5 business days.


SHIFTER LEVERS

Info will be posted soon.


BRAKE PEDALS

Info will be posted soon.


REAR BRAKE LEVER & PERCH - $18.99

We stock quality brake lever and perch assemblies for Honda Fat Cats. The original Honda rear brake lever (on left side of the handlebars), part number 53178-HB7-670, is no longer avaialble, and there are no aftermarket lever replacements available for the lever itself, so we hunted down this replacement assembly. This part fits both years of the Fat Cat and requires removal of the original brake lever perch.


FRONT BRAKE LEVERS - $12.99

FTC stocks front brake levers for Honda Fat Cats. This quality aftermarket part is a direct replacement for the original Honda part number 53175-GM2-010 and it is the lever that is on the right side of the handlebars on this bike.



DRIVE CHAINS & SPROCKETS

FTC offers drive chains and sprockets for both years of the Fat Cat. We offer DID brand O-ring and non-O-ring drive chains (include master links; Non-O-ring chain will need to be cut to length before installation), JT Sprockets stock size 39-tooth rear sprockets, and 12, 13, and 14 tooth JT Sprockets front drive sprockets (13 tooth is stock size). Please select what you require below. We stock the stock size sprockets and non-O ring chain, which will have to be cut to length by the end user. All other rear chain and sprocket options typically ship in about 4 business days.


DRIVE CHAINS GUARDS

The original Honda chain guard, part number 40510-HB7-770, was discontinued a few years ago, but one of our fellow Fat Cat enthusiasts was kind enough to let us borrow his so we can model it and have the part duplicated. As soon as we have a solid design nailed down, we'll post an update.


SWING ARM BUSHINGS - $34.99/PAIR

We stock genuine Honda swingarm bushings for both years of the Fat Cat. We sell these parts in pairs so you can replace both at the same time. The Honda part number for each individual bushing is 52108-KE5-003.


REAR CHAIN ADJUSTER PLATES

Info will be posted soon.


FRONT WHEEL BEARINGS & SEAL KITS - $19.99

FatTireConversions.com stocks All Balls Racing brand front wheel bearing and seal kits for both years of the Fat Cat. This kit includes both wheel bearings and axle shaft seals required to do the whole job.


REAR WHEEL BEARINGS & SEAL KITS - $19.99

FatTireConversions.com stocks All Balls Racing brand rear wheel bearing and seal kits for both years of the Fat Cat. This kit includes both wheel bearings and axle shaft seals required to do the whole job.


FRONT TIRES

The Honda Fat Cat TR200 came equipped with 24.5x8x11 size front tires. We have not found a manufacturer who makes the original 24.5" tall tire, but we've been able to source a handful of tires that are 1/2" taller or shorter and will fit properly. Below is what we have available for appropriately sized front tires for the Fat Cat.

KENDA BEAR CLAW - $109.99

The Kenda Bear Claw is an aggressive 6 ply tire that provides excellent straight line flotation when the trail is super muddy and loose. This tire typically ships in about 4 business days.


CHENG SHIN LUMBERJACK - $91.99

The Chen Shin Lumberjack is a 2 ply tire that has a bluntly rounded profile and a light weight design to conserve power. This tire is a great match for the Duro HF243 front tire listed below. This tire typically ships in about 4 business days.


DURO EXCAVATOR - $99.99

The Duro Excavator HF274 is a 4 ply tire that puts a lot of rubber on the ground providing a smooth ride and excellent traction on hard and soft terrain. This tire typically ships in about 4 business days.


CARLISLE AT489 - $179.99

The Carlisle AT489 front tire is a round profile, 3 ply tire that is makes it easy to lean the bike into curves and gives great trail performace and grip without being heavy. This tire typically ships in about 4 business days.


ITP MUD LITE AT - $98.99

The ITP Mud Lite AT is a durable, yet light weight 6-ply tire that has an appropriately sized 3/4" lug height and a rounded profile that turns-in easily. This tire typically ships in about 3 business days.


AMS SWAMP FOX - $109.99

The AMS Swamp Fox tire is a heavy-duty 6 ply tire with a 5/8" tread depth that provides good traction without bogging down your motor when the conditions get sloppy. This tire typically ships in about 4 business days.

REAR TIRES

Honda FatCat tires are no longer difficult to find! After scouring our catalogs, we have been able to put together a range of appropriately sized tires for these machines. The stock tire size for the back of the Fat Cat TR200 is a 23.5x8x11, which is an odd size for modern tires, but we have been able to source a bunch of different 24" tires, along with one 23.5 tires that have matching dimensions for the wheel diameter and tire width. Below is what we have available for tires that fit the back wheel on these machines.

KENDA PATH FINDER - $91.99

The Kenda Path Finder is a light weight 2 ply tire that provides a smooth ride withouth sacrificing grip. This tire typically ships in about 4 business days.


KENDA MAX K284 - $88.99/$91.99

The Kenda Max K284 is a 2 ply tire that provides great straight line stability on the trail while providing good side grip in the turns, while saving on weight. This tire typically ships in about 4 business days.


KENDA BEAR CLAW - $92.99

The Kenda Bear Claw is an aggressive 6 ply tire that provides excellent straight line flotation when the trail is super muddy and loose. This tire typically ships in about 4 business days.


CHENG SHIN C832 - $92.99

This 2 ply tire is fantastic value for general trail riding. With all the small evenly spaced tread knobs, this tire give great traction on just about any terrain. This tire typically ships in about 4 business days.


DURO HF243 - $94.99/$99.99

The Duro HF243 is a 2 and 4 ply tire with a tough carcass and a bluntly rounded profile. It has closely spaced tread bars and knobs that smooth out the ride and provide great traction for general trail riding without robbing power. This tire typically ships in about 4 business days.